| :warning: WARNING | | :------------------------------------------- | | To clone this entire repo you need 14.82GiB. |

| :exclamation: Because this is only how I did it with my specific device, | | ------------------------------------------------------------------------ |

| :zap: No WARRANTY or SUPPORT is provided! | | ----------------------------------------- |

OnePlus-Nord-N10-5G-T-Mobile-BE2028-Carrier-Unlocked-Multiple_Things

What I did to flash INTL FIRMWARE to UN-brand the device(Oneplus Nord N10 5G BE2028, T-Mobile carrier unlocked), and flash Havoc OS with root(Magisk).

All instructions were written based on using Linux Mint 20.3 x86_64.

All files are copyrighted to their respective owner.

Firstly I would like to thank "@nosaj_33" for spending "5 hours, 38 minutes and 22 seconds" helping me UN-brand the device and giving me instruction. And the day before spending "44 minutes and 48 seconds" with me.

This section is what you need to unarchive/extract:
The platform-tools_r33.0.1-linux.zip if on Linux and it is the appropriate version needed:

1. Extract Restore_OOS.7z.

2. Extract the file OnePlusNordN105G_Restore_OOS11.0.5.BE86AA.zip.

3. Make sure you unzip the ROM[Extract].7z for the actual files.

This section of instructions is for getting the patched boot image. And unlocking the bootloader:

1. Start on Android 11, aka update the phone fully. You dont have to set the phone up and transfer and login because later the data will be reset.
2. Enable developer options "Settings", then tap "About phone", then tap "Software version" untill it says it is enabled.
3. Go to "Settings", then "System", then "Developer options", then enable "OEM unlocking", "Advanced reboot" and "USB debugging".

(For Metro/TMO: unlock the bootloader via https://www.oneplus.com/unlock_token)
gather and enter all the information to the page,
in order to get the unlock code you have to boot to the bootloader,
first, connect the phone to computer,
then there are two methods of getting to the bootloader:
. unlock the phone screen then hold the power button and click the 3 dots and click "Bootloader".
or
. run "./adb reboot bootloader".
then after one of those methods are done run "fastboot oem get_unlock_code".
While you wait for the unlock token you can prepare the rooted boot image: