Arduino Simple CLion Project (101)

Introduction

This project demonstrates a simple Arduino LED blinking program developed in CLion using PlatformIO. It shows how to set up Arduino development in CLion and provides a foundation for learning embedded systems programming.

Prerequisites

Arduino Development With CLion

Installing PlatformIO Core

PlatformIO Clion Integration

Project Setup

1. Clone this repository
2. Open the project in CLion
3. Ensure you have the Arduino framework selected:
   • File > Settings > PlatformIO > Platforms
   • Select "Arduino AVR" framework

Building and Uploading

1. Build the project:

   • Click the "Build" button in the toolbar

2. Upload to Arduino UNO:

   • Select the correct board: Tools > PlatformIO > Select Board > "Arduino Uno"
   • Click the "Upload" button

Arduino How to:

Using some cites as a reference https://alexgyver.ru/lessons/ardu-start/ (Начало работы с Arduino на русском)

Features

• Blinking built-in LED with serial output
• C++11 compatible code
• PlatformIO integration with CLion

Troubleshooting

If you encounter issues:

1. Check board selection in Tools menu
2. Verify serial monitor settings (9600 baud)
3. Ensure the Arduino Uno is properly connected

License

MIT

Contributing

Pull requests are welcome. For major changes, please open an issue first to discuss.

Acknowledgments

• PlatformIO for Arduino development in CLion
• Arduino framework for hardware abstraction